Starlight Xpress Lodestar X2 Autoguider
The Starlight Xpress Lodestar X2 is a very compact guider which is powered and operated via a single USB2.0 computer connection. The Lodestar X2 also provides an opto-isolated output connection for direct control of most mounts via their Autoguider sockets. This output is compatible with the ST4 style of RJ12 connection and supplies 4 pull down direction lines and a common return. Alternatively, you may send the mount control signals via a serial connection from the guider control computer. The LodeStar X2 includes a USB cable and an ST4 cable.
The SX Lodestar X2 utilizes a very sensitive Sony ‘ExView’ CCD (the ICX829) with an array of 752 x 582 pixels in a ‘half-inch’ format. Although the chip is not cooled, it has a very low dark signal and very little readout noise, so it can be used to guide on faint stars that are beyond the reach of webcams and CMOS chip based guide cameras. Because of the high sensitivity and high dynamic range characteristics of the Sony ICX829, the Starlight Xpress Lodestar X2 makes a superb electronic finder and planetary imaging camera as well as a splendid autoguider!