Quick view Stellarvue Riser Set System with Losmandy Sized Rail - RSS-L MSRP: Was: Now: $129.00 Compare
Quick view Stellarvue Riser System with Losmandy Sized Rail (metric) - RSS-LM MSRP: Was: Now: $129.00 Compare
Quick view Vixen Style Rail 10 1/2" - TP012 This is the dual slotted Vixen style rail used on the RB002V Riser Block System. The rail is about 10 1/2" long with two slots, one that is 5" long and one that is 2 1/4" long. This allows the rail to be used with the riser blocks, placing them on one... MSRP: Was: Now: $39.00 Add to Cart Compare
Quick view Stellarvue Standard Riser Set Risers are used to attain balance needed when imaging with some smaller telescope systems. This is particularly important when mounting cameras to our SVX70T and SVX80T refractors. With these lighter telescopes the relatively heavy camera... MSRP: Was: Now: $69.00 Pre-Order Now Compare
Quick view Stellarvue Metric-Version Riser Set Risers are used to attain balance needed when imaging with some smaller telescope systems. This is particularly important when mounting cameras to our SVX70T and SVX80T refractors. With these lighter telescopes the relatively heavy camera... MSRP: Was: Now: $69.00 Pre-Order Now Compare
Quick view Stellarvue Riser Set with Vixen Rail - RSS-V Riser blocks are used when mounting telescopes to rails, as more room is needed between the rail and scope. This is particularly important with our smaller telescopes (SV70T, SV80ST) when a camera is mounted to the rear and it cannot be balanced... MSRP: Was: Now: $99.00 Compare
Quick view Stellarvue Riser Set with Vixen Rail (metric) - RSS-VM This system is identical to the RSS-V, except it comes with two M6 80mm long metric screws instead of 1/4-20 screws. Use this set if the mounting rings on your telescope have metric threads. Riser blocks are used when mounting telescopes to... MSRP: Was: Now: $99.00 Compare
Quick view Stellarvue Riser Set System with Losmandy Sized Rail - RSS-L Risers are used to attain balance when imaging with some smaller telescope systems. This is particularly important when mounting cameras to our SVX70T and SVX80T refractors. With these lighter telescopes, the relatively heavy camera adds... MSRP: Was: Now: $129.00 Compare
Quick view Stellarvue Riser System with Losmandy Sized Rail (metric) - RSS-LM This system is identical to the RSS-L, except it comes with four M6 75mm long metric screws instead of 1/4-20 screws. Use this set if the mounting rings on your telescope have metric threads. Risers are used to attain balance needed when imaging... MSRP: Was: Now: $129.00 Compare
