50 - 60 mm Finderscope Rings

1. 50 - 60 mm Low Profile Finder Scope Rings

This is a light weight, low profile ring system with a shoe that will attach to any flat or curved surface that is 3 1/4" in diameter or larger. This is ideal for Dobsonian reflectors and is used by the highest end reflector makers as their standard...

2. 50 mm - 60 mm High Profile Rings

This 50/60 mm finder ring set mounts into the dovetail shoe on the Stellarvue or Feather Touch focuser. It is high profile to look over the tube rings. The stalk with dovetail foot is compatible with our dovetail shoes and most common "Synta-type" finder...

3. Finder Rings That Mount to Hinged Rings

Use this ring set to mount your 50 mm or 60 mm finderscope to the top of a telescope's 1" wide, hinged mounting ring. Your telescope mounting rings must be about 1” thick and have either a 1/4-20 or 6 mm threaded center hole. Most but not all...

4. Finder Rings that Mount to Schmidt-Cassegrains

Made to mount our 50 - 60 mm finderscopes to a Schmidt-Cassegrain (SCT) telescope. This has a dovetail shoe that attaches to the mirror cell on 8” and larger Celestron or Meade SCTs. A small dovetail slides into this shoe with the finder rings...

5. Finder Rings on a telescope V-Rail

Mount your finder scope on a telescope mount. These 50 - 60 mm finder rings are mounted to a TP014 V-rail (aka Vixen-style rail). The 6 inch rail has a 1/4-20 threaded hole 3 1/2" from one end so this ring system may be used with either a standard camera...

6. Clamshell for 50 mm Finder

This is a one piece clam shell ring for our 50 mm finder scopes and guide scopes. It will not fit any other finder scope. This solid clam shell has velvet lining and a compression ring that allows the user to rotate the finder/guide scope as needed and...