|
|
Stellarvue 80mm Finderscope
|
|
|
|
|
Finderscope Specifications |
F80 Finderscope
13X80mm finder with standard reticle. Uses our high precision, fully multi-coated 80mm clear aperture F3.75 objective, baffled tube, rotating back (requires some finder re-alignment after rotation), fully multi-coated correct image erecting prism, 1.25" helical focuser, E3023R fully multi-coated eyepiece, and a focusing, glass reticle. Weighs only 2.5 pounds! (Mounting ring systems sold separately).
The 80mm finderscope has a tube diameter of 85mm.
#F80 - $249
|
|
|
Eyepiece not included
|
2” Straight through focuser for F80
Unthread the rear (prism and 1.25" focuser) and thread on a 2" helical focuser for straight through viewing with your 2" eyepieces. Get a porthole, wide field view or use the Stellarvue E7026R for a wide field view with reticle.
F80H - $49
|
|
Out of Stock
|
|
Stellarvue Crosshair Illuminator
This illuminator will screw into any reticle eyepiece to provide you with a variable brightness red illumination on your crosshair. Vary the brightness to suit your preference. Knurled aluminum brightness knob and standard battery included.
Temporarily out of stock. Will be back in stock in late December of 2011.
#EI2 - $19
|
|
80 mm Mounting Rings
These mounting ring sets use 97 mm ID adjustable mounting rings with nylon tipped stainless adjustment screws
|
|
|
|
R80A: Finderscope rings - with multi-use mounting base - $ 46
This ring set comes with a quick release dovetail shoe that mounts directly to the Stellarvue cnc clamshell using two screws. It also mounts to the Stellarvue dual speed focuser using a single screw. It does not mount to the 2” Feather Touch focuser since the Feather Touch does not have any mounting holes. This is the one to chose for mounting the finderscope to a Dobsonian telescope either on a flat board or to a strut tube. It is our lightest finderscope ring system.
|
|
|
|
R80D: Finderscope rings on dovetail stalk - $ 55
|
|
|
|
R80E: Finderscope rings for mounting to hinged rings - $ 36
|
|
|
|
R80S: Finderscope rings for SCT's - $ 60
|
|
|
|
R80T: Finderscope rings for Televue Clamshell - $ 60
|
|
|
|
R80TAK: Finderscope rings and base for Takahashi - $65
|
|
Mounting ring parts
|
|
|
|
A Base
This is the same base used on the R80A. Mount this on a second telescope so your finderscope with rings attached can be quickly moved from one telescope to the other.
#FEAE - $29
|
|
|
|
E Base
This is the same based used on the R80E. Use this to mount your ring system to another hinged ring.
#FE - $9
|
|
|
|
S Base
This is the same dovetail foot and shoe used on the R80S ring system. It is the same as the D base above but does not stick up as high.
#FSE - $19
|
|
|
|
FBA Base
This is the same shoe used at the bottom of the R80S. It is a shoe that accepts our standard finderscope dovetail foot that is 1.21” (31 mm) maximum width and tapers to a width of about .82” (21 mm). This shoe has multiple mounting hole and may be attached with one or two screws.
#FBA - $19
|
|
|
|
Camera Tripod Adapter
This is a round base with a 1-4”-20 threaded hole on the bottom. It mounts to any standard camera tripod and supports the finderscope ring system. This is the easiest way to place your finderscope on a camera tripod for use as a small, wide field telescope.
#FET - $24
|
