AZ100 Alt-Az Mount with Go-to Motor System

Details

Dual saddle with Vixen 'V' and Losmandy 'D' profiles.

CNC machined and black anodized finished and fitted with stainless steel hardware.

The center of the saddle has an M16 thread to accept a counter-weight shaft.

Details

Fits to the inside face of the saddle with 2 x M6 bolts and can be mounted on the left or right side of the mount.

Handle is 350mm or 14" long.

Compatible with both 'D' or Dual 'DV' saddles.

The included threaded block insert provides an angled mounting position.

Details

25mm diameter stainless steel shaft and mounting flange.

Supplied with anodized aluminum safety knob with integral stop washer.

This stainless counterweight fits the AZ75 and AZ100. it is a 25mm diameter stainless steel shaft. Ir uses an M16 thread screws to screw directly into a saddle or mounting flange. It is supplied with anodized aluminum safety knob with integral stop washer.

Details

125 mm diameter, 3.75Kg stainless steel weight. 40mm thick. 25mm bore. Use this with the Rowan mounts when used with only one telescope. Your mount will need the following counterweight shaft and adapter:

• For the AZ75 use: This shaft and adapter
• For the AZ100 use: This shaft and adapter

The mount does not have to be perfectly balanced and you can use the guide below to get the proper weights for your telescope.

This is a combination 8 KG counterweight and the stainless steel shaft that fits it. The 8KG counterweight is painted black and has a large hand knob. The threaded screw connected to the tightening knob has nylon tip to keep the shaft from getting scratched. This shaft threads into the Rowan saddle or the Rowan flange if only one saddle is used. The shaft has a safety screw knob at the end. This selection does not include the flange. If you need this and the flange make this selection.

This is a combination 8 KG counterweight, the stainless steel shaft that fits it and the flange that attaches to the AZ100 mount. The 8KG counterweight is painted black and has a large hand knob. The threaded screw connected to the tightening knob has nylon tip to keep the shaft from getting scratched. This shaft threads into the Rowan saddle or the Rowan flange if only one saddle is used. The shaft has a safety screw knob at the end. This selection includes the mounting flange which you will not need your mount has two saddles. If you have two saddles and you need this weight and shaft only make this selection.

This is the heavy duty, stainless tripod is used on the Stellarvue M002CS tripod/mount system and it also works perfectly on Rowan AZ75 and AZ100 mounts. This tripod is used on the heavy duty Celestron CGEM tripod so it is not the same as other lighter-weight stainless tripods. Has a small eyepiece tray and uses an M12X1.75 threaded attachment stud.

Folding HD tripod with MA top for GM 8 & G-11 mountswith adjustable leg design. Height range from 33" to 52"
All heights are from ground level to top of tripod, vertical.
Carries up to 425 lbs.
Tip to Tip legs retracted 34"
Tip to Tip legs extended 53"
Folded Completly Down with Legs Retracted 14" x 14" x 39"
Wt. 35 lbs.

*This item is drop shipped directly from the vendor and usually takes about 2 weeks to arrive.