4. Reducer Flattener for SVX102T

Shop by Category

$395.00

SKU:

SFFR.74-102T

Width:

6.00 (in)

Height:

6.00 (in)

Depth:

6.00 (in)

Overview
Reviews

Product Description

This is the Flattener/Reducer designed for the SVX102T and SVX102T-R. Select which focuser your telescope uses above and the correct focuser adapter will be provided.

This reducer/flattener converts the 102 mm f-7 714 mm focal length objective into a 102 mm 535 mm focal length f-5.25 wide field imaging scope. Merely un-thread the adapters from the focuser draw tube and thread this unit onto the focuser's draw tube.

With this model, on the camera side there is a 10 mm extension tube and an adapter. With these left in place this system has a standard 55 mm back focus when used with our 102 mm f-7 telescopes. So this reducer/flattener as it comes will work with a DSLR with a t-ring. It will also work with a ccd camera that uses either an M42, M48, 2.156" or 3"-24 thread. Select the camera thread you need above. If your ccd camera uses another thread and/or if the back focus is not exactly 55 mm, please call or email us at mail@stellarvue.com and we can provide you with a modified version of this reducer/flattener with the proper backfocus.

Please note: This reducer/flattener is designed to work with our newer SVX102T and SVX102T-R refractors. It may or may not reach focus on former/older model SV102 telescopes.

Flattener/Reducer for 2.5" Focusers: When you order the reducer/flattener for a 2.5" focuser it will use its standard M63 attachment thread which is the same as the thread on the Feather Touch or Stellarvue 2.5" focusers. Merely unthread the 2" adapter on the focuser and then thread the reducer/flattener into place. Again, some earlier model Stellarvue refractors were made before this reducer/flattener was created so they may not come to focus with this reducer/flattener.

Flattener/Reducer for 3" Feather Touch Focusers: This flattener/reducer comes with an M63 to M75 adapter. Merely unthread the 2" adapter on the focuser drawtube, thread in the adapter we supply and thead the reducer/flattener into it.

Flattener/Reducer for 3" Stellarvue Focuser: This flattener comes with an M63 to M78 adapter. Merely unthread the 2" adapter and the knurled adapter. Use the supplied adapter to thread the reducer-flattener directly to the focuser drawtube.

Flattener/Reducer for 3" Moonlight Focuser: Order the flattener/reducer for the 2.5" focuser. Ask Moonlight to supply an M63 adapter for the 3" Moonlight focuser.

Product Videos

Custom Field

Product Reviews

Write a Review

3 Reviews Hide Reviews Show Reviews

5
0.74 reducer/flattener

Posted by Robert Vlcek on 20th Oct 2022

Moving from dslr astrophotography to one shot color. It’s a big step for me, and I needed some hand holding with the process. Everyone at Stellarvue has been great. They take the time to fully explain the product and process. There is pride in their workmanship, and it shows from my SVX 115 T telescope / reducer-flattener, and other projects I have purchased. Thanks everyone.
Best regards,
Bob Vlcek
5
Very High Quality

Posted by Ken Toliver on 29th Jun 2022

As expected, finely machined and built. SV recommended that I purchase this with the scope as they match the optics and align everything before they ship. Very glad I did. First test image had nice round stars and literally zero tilt.
5
SFFR.74 Reducer

Posted by Daniel Young on 9th Nov 2021

Works really well. So sharp. Does darken the edges on full frame.