Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Stellarvue

Stellarvue SV110ED Refractor

$1,195.00

Stellarvue SV110ED Refractor

$1,195.00
SKU:
SV110ED-25SV
Shipping:
Calculated at checkout
Quantity:
Share

Product Description

Stellarvue's Largest ED Refractor: The SV110-25SV is the newest version of our largest (110 mm) ED doublet refractor. This super telescope now comes with either a 2” Crayford focuser or our exclusive 2.5” dual speed, rach and pinion focuser. The 110 uses the same ED lens design as the SV80ED but gathers significantly more light and can be used at much higher powers. Telescope comes with dual rings and a 121 mm extension.  With this extension removed (as shown), the telescope may be carried on a plane and used with binocular viewers without any adapters.

This 110 f-7 ED doublet refractor has a white aluminum tube and dewshield. It comes with a fully rotating 2.5” dual speed Stellarvue focuser with 1.25” and 2” compression ring adapters, 121 mm threaded extension and dual hinged rings. A case, diagonal and eyepieces are available separately.  Telescope comes fully assembled with the extension in place, ready for conventional viewing with your star diagonal and eyepieces.

The Stellarvue SV110 is our largest, and best priced, doublet ED refractor telescope. The SV110 uses a hand figured ED lens, known for  its exceptional image quality. It produces a brighter and higher resolution  image than the 102, which uses the same glass and lens design. For best results when imaging, use our SFF7-25 field flattener.

Fully multicoated ED objective lens: With a 110 mm  f-7 extra low dispersion objective lens, this telescope presents an excellent star test with color correction that is far superior to a  typical achromat. The lenses are hand figured by a master optician to a high Strehl ratio. These are not mass produced, machine made lenses. This telescope  uses an ED objective lens  that  has been  tested three times in the USA, for added quality control. We accept  no compromises in this telescope's  optics. Several  layers of  extreme broadband coatings are used on all four of the lens surfaces.  This further enhances the contrast of the image: the stars appear vivid and  bright against a dark black background. These coatings  transmit light above and below the visual spectrum  making them well suited for ccd imaging.

Stardust white aluminum tube and dew shield: The aluminum tube and dew shield is painted in a lustrous and beautiful stardust white finish. This white finish will stand out against the black anodized aluminum fittings giving this telescope a high-end, classy look. The 121 mm extension tube may be removed making the telescope airline carry on size and allowing for the use of binocular viewers without any adapters. The dew shield can either be extended or retracted. Extension reduces dewing at  night can cut out the light from those blaring street lamps. The dew shield also  serves as a lens shade during the day. Retraction will reduce the length of your telescope  tube for convenient storage.

Internal tube treatment:  The inside of the tube assembly is fully baffled and painted "ultra flat black" This treatment is far more effective than tubes that are textured and painted black. Light baffles cut down on tube wall reflections entirely increasing contrast significantly.

Focuser: The SV110 comes with the SVF25 focuser. This is a 2.5" fully rotating, precision dual speed focuser with a threaded focuser drawtube, 1.25 and 2” compression ring adapters and an over-sized rotating assembly is standard.  The  focuser has three focusing knobs, one on the left and two on the right. The single knob on the left and a larger knob on the right provide coarse focusing.  On the right side is a second, slightly smaller, brass colored fine focus knob.  This fine focus knob has an 11-1 rotation reducer, allowing for fine and accurate  focusing.  A tension adjustment set screw is  positioned under the focuser and a thumb screw allows for locking the focuser. The draw-tube is inscribed with a millimeter scale on top. This focuser is larger in inside diameter than the 2” focuser and can lift heavier weight. Two 5 mm threaded holes on top of the focuser allow for the  attachment of a finder scope. The focuser is fully rotating, only requiring the loosening of a knob. The SFF7-25 Field flattener threads into the rear of this focuser.

Aluminum hinged rings:   The SV110 comes with two hinged, aluminum mounting rings. Each ring has five screws, top and bottom.  Threaded holes are 6mm. There is one center hole, two holes spaced 1.5" apart  and two holes spaced 60 mm apart. Use the optional TP-14 rail for telescope mounts using the Vixen style rail or use the optional TP6 for mounts that use the  larger Losmandy style rail.

What else do you need?  In addition to the supplied  accessories, you will need a star diagonaleyepiece(s), a mount, and a reflex or optical finder scope.

Light gathering and magnification power: The  purpose of a telescope is to gather light and magnify the apparent size of the  object being viewed. A 110 mm refractor gathers 247 times the amount of light of  the naked eye. This will reveal faint objects in space. Magnification power (the  increase in relative size of the object being viewed) is dependant upon the  eyepiece being used. Different eyepieces provide different magnification powers.  Since this telescope uses a highly accurate, hand figured objective lens and  has  been  triple tested, these telescopes are free of coma and astigmatism seen in  many imported telescopes. This provides sharper details when viewing at higher  powers. The Recommended Accessories section can guide you through making the best  choices in eyepieces.  

Two year warranty and Stellarvue Service:  Stellarvue telescopes and accessories are covered by a two year warranty. But it  does not stop there. Since we are a telescope maker, we can repair your  telescope for a nominal fee years after it goes out of warranty, should you  accidentally drop it on concrete or otherwise damage it. Buy a Stellarvue  Telescope  with confidence. Our customer care is legendary.

Product Specifications:  SV110-25SV ED Doublet
  Description
Objective 110mm diameter, 770mm focal length (f7), air spaced ED doublet
Tube Assembly Machined aluminum tube - instrument white outside, ultra flat black inside
Dimensions OTA: 25 1/2” long with extension, 20 3/4” long without extension; extended dew shield adds 6 1/2” to length.  OTA is 4 1/2” in diameter
Weight OTA: 13 lbs.  Rings at 1 lb each add 2 lbs total
Dewshield 5.53” diameter 9 1/2” long dewshield with cap
Focuser  2 1/2” dual speed SVF25 fully rotating focuser threaded to accept the SFF7-25 field flattener for imaging. Comes with 2” and 1.25” compression ring adapters, and 121 drawtube extension
Finder Optional
Rings Cast aluminum dual mounting rings with five M6X1 thread holes on top and bottom
Plate/Rail Optional
Case Optional
Diagonal Optional
Light Gain 247x (human eye = 1)
Theoretical Resolution 1.1 arc sec (Dawes Limit)

Product Reviews

Find Similar Products by Category