Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...

Reducer/Flattener for our 115mm with 2" focuser


Reducer/Flattener for our 115mm with 2" focuser

Calculated at checkout

Product Description

Focal Reducer/Field Flattener for former model SV115T with 2" focuser

This reducer flattener is optimized for our SV115T triplet lens. The flattener slips into the 2" focuser. The 0.8X focal reduction converts the 115 mm f-7 to f-5.6.

This reducer/flattener has a standard 48 mm filter thread. Standard 2" filters can be added to the reducer flattener when imaging. The backfocus of the unit is 55 mm. Since a DSLR with t-ring has a 55 mm backfocus, plug the reducer/flattener into the focuser and then thread on the camera/t-ring to the flattener as shown below.


If you are using a CCD camera, an additional set of extension tubes may be needed depending on the backfocus of the camera. So you need to know how much distance there is between the cameras T-thread and the ccd chip. It is important that the distance from the back of the field flattener to the chip be maintained at 55 mm. If the ccd camera has a backfocus of only 35 mm, a 20 mm extension will be needed. See the example below.

In this example the camera had a 35 mm backfocus so a 20 mm extension tube was needed. It threads in between the back of the field flattener/reducer and the camera as shown.


In this case the extension tube must be a standard t-thread (M42 X.75). Please note that our extension tubes are the larger 48 mm size and will not work for this. You can obtain 42 mm extension tubes at Edmund Optics.

Product Reviews

Find Similar Products by Category