The R95L guide scope rings are used to mount guide scopes and finderscopes that have tubes smaller than 90 mm in diameter. This ring system is designed to be used with Losmady's D sized guide scope rails.
This ring system has an inside diameter of 95 mm. This is the perfect size for holding our 80 mm finderscope or our SV60 Apo telescope for use as a guide scope. Guide scopes are used as both super finders and for guiding the main telescope when doing astro-photography. When mounting a guide scope on top of another telescope, it is necessary to use adjustable rings. Adjustable rings allow the guide scope to be moved slightly in relation to the main telescope. This is necessary because if non-adjustable hinged rings are used, the two telescopes will never be pointed in precisely the same direction. When using a guide scope as a super finder, adjustable rings will allow the user to make sure each telescope is centered on the same object. When doing astro-photography, adjustable rings will make it possible to point the guide scope at a relatively bright guide star while the main telescope is centered on the object being photographed.
In order to use this system, mount a Losmandy rail of the proper length atop the main telescope's hinged rings. Slide the two rings onto the rail as shown. Insert the guide scope into the rings and point the guide scope by adjusting the three nylon tipped thumb screws on each ring. Stellarvue rails are sold separately. Choose a rail that is the proper length to work with the dual rings on your telescope.