|
Mounting Rings for F80 finderscopes |
 |
Finderscope rings and
quick release dovetail base for new Stellarvue CNC clamshell.
The Rings are 3 7/8" I.D. and
come with nylon tipped stainless steel adjustment screws. Slide the
rings and finder into the dovetail and lock it in place with the thumb
screws. A safety catch is located on one end of the dovetail rail so the
finder will not slip out of the dovetail accidentally while being used.
#R80A
$46 |
 |
Finderscope rings for dovetail mounting.
This includes our dual finderscope rings mounted to
dovetail base that fits most finderscope dovetail shoes. Mounts to
dovetail shoes found on scts, Chinese focusers (like the
ED80) and on the main tube of most import reflectors. Dovetail base is 1
3/16” maximum width at bottom. The dual rings are 3 7/8" I.D. and
come with nylon tipped stainless steel adjustment screws. #R80D $55 |
 |
Finderscope Rings for
mounting to hinged rings. This
ring system includes a dovetail base that attaches to one of our hinged
telescope mounting rings. Also mounts to any hinged ring that is about 1" wide
and has a center hole on top threaded for either a 6 mm or 1/4-20 screw. The two
finderscope rings have a small dovetail rail that slips into the dovetail
base for easy removal of the rings and finderscope. The Rings are 3 7/8" I.D. and
come with nylon tipped stainless steel adjustment screws.
#R80E.
$36 |
 |
Finderscope rings with SCT base.
This quick release mounting system is made
for mounting rings on the rear cell of most SCT's. The base
attaches with two screws that are 1.125" - 1.55" apart. The base is low
profile and places the rail between the rings only 1 1/8" above the
mounting surface. The dual rings may be removed quickly and easily for
transport or storage. The Rings are 3 7/8" I.D. and come with nylon
tipped stainless steel adjustment screws.
#R80S
$60 |
|
|
Finderscope rings and base for Televue clamshells.
The R80T comes with a quick release dovetail base . This
one mounts to the Televue Clamshells. The Rings are 3 7/8" I.D. and
come with nylon tipped stainless steel adjustment screws.
#R80T
$60 |
 |
80mm finderscope rings and base for Takahashi.
The R80TAK comes with a quick release dovetail base that
mounts to the standard Takahashi base with two holes 28mm apart. The
Rings are 3 7/8" I.D. and come with nylon tipped stainless steel
adjustment screws.
#R80TAK $60 |