superfinder

Buy	Description	Price
SUPER-FINDER GUIDE-SCOPE
	Deluxe 15 X 80 Superfinder/Guidescope. Far superior to any other finderscopes, this one uses a hand figured, astronomical quality f-6 objective that can be taken to higher power if needed. In order to achieve the highest optical standard, we use our fully multicoated, air spaced objective mounted in an adjustable aluminum lens cell. includes: Guide-scope with 2" Smooth and stable Crayford focuser with 1.25" adapter ($399 value) #D1033 massive 2" 90 degree correct image, 40mm aperture erecting prism ($248 value) E7032IR 2" 68 degree eyepiece with focusing crosshair reticle and has a provision to add an illuminator ($149 value) C80 foam lined hard case ($85 value). Since this is built like a telescope it is heavier than a finderscope and must be used with our guide-scope rings, offered below. It will not work with our standard 80mm finderscope rings as the main tube of this telescope is larger. #F80D2	Regular prices: ~~$881~~ Save $182 $699
	Rigel Pulse Guide Illuminator. This illuminator will screw into the eyepieces of any of the finderscope above to provide you with a variable brightness red illumination on your crosshair. Vary the brightness to suit your preference. Tow small knobs allow you to adjust the pulsation of the light so it blinks on and off at the rate you prefer. One knob controls how long the light is off and one how long it remains on. The blinking light allows you to see the object you are centering and the crosshair vividly. #EI	$39
HEAVY DUTY MOUNTING RING SYSTEMS FOR F80D2 SUPER-FINDER/GUIDE-SCOPE
	Short rail guide-scope ring system. Includes two 120mm ID rings with three large stainless, nylon tipped adjustment screws with T-knobs, two dovetail bases that slide onto a rail that is 6 1/2" long. The rail mounts atop any dual rings that have a top threaded hole. Attachment screws pass through slots on the rail. The slots provide an adjustable hole spacing from 3.5" to 5.75". So use this rail if your rings are between 3.5" and 5.75" apart. This is the plate for mounting the rail to the top of rings when the rings are mounted to the Stellarvue TP-6 or Losmandy DUPS plate. #RSS	$119
	Medium rail guide-scope ring system. Identical to the system above but the rail is 15" long. Slots for mounting holes providing a adjustable hole spacing from 11.5" to 13.75". Use this rail for mounting to the 8" SCT's. Separate attachment bases (Below) are provided for use with Celestron telescopes. #RSM	$129
	Long rail guide-scope ring system. Identical to the system above but the rail is 20" long. Slots for mounting holes providing a adjustable hole spacing from 15.25" to 18.75". This is the correct spacing for the Meade 7" Mak, 10" SCT and 12" SCT. #RSL	$139

View Your Shopping Cart



				If you want a finderscope that is as sharp and flexible as a telescope, this is it! Our F80D2 Super Finderscope includes our 80mm f-6 air spaced, hand figured objective, 2" Crayford focuser, 2" 40 mm clear aperture correct image erecting prism and our huge 2" 70 degree 32 mm wide field focusing cross-hair reticle eyepiece that accepts an optional Pulse Guide illuminator. This system comes in our heavy duty, foam lined, hard side case which holds the scope, erecting prism, eyepiece, illuminator and more.



	While this system is heavier than our finderscopes, it is sharper since it uses a precision objective mounted in our adjustable lens cell. If you want a finderscope that is sharper and delivers a higher level of performance, this is it! The Super Finderscope does not work with our finderscope rings. It requires guide-scope rings as shown below. These ring systems fit a variety of telescopes and will work with any of our 80 - 102 mm refractors.