Buy
Description Price
Stellarvue's new cnc clamshell rings
with integral 2" dovetail
New cnc clamshell with dovetail base for our 78 -90mm telescopes.
Features polished cnc machined 6061-T6 aluminum and easy one touch
aluminum knurled adjustment knob. The dovetail base mounts directly to
Vixen, GP, CG5 style dovetails, Televue mounts or camera tripods. It
also bolts directly to our TP-6 plate. The insider diameter is 90mm. #R90C
$119
New cnc clamshell with dovetail base for our 102 - 105mm telescopes.
Features polished cnc machined 6061-T6 aluminum and easy one touch
aluminum knurled adjustment knob. The dovetail base mounts directly to
Vixen, GP, CG5 style dovetails, Televue mounts or camera tripods. It
also bolts directly to our TP-6 plate. the inside diameter is slightly
more than 4" in diameter and these are made exclusive for Stellarvue
telescopes. #R102C
$129
Guide scope Mounting Rings
Guide Scope Ring Systems.
Click Here.
Hinged Mounting Rings
Heavy Duty Dual Rings for our 78 - 85mm scopes . Features a large
footprint. Has multiple 6mm holes on both sides spaced at 60mm and 1 1/2"
apart and one in center. Uses an oversized aluminum knob with rubber grip
making it easy to use under all conditions, with or without gloves. Works
with tubes that are 90mm in diameter. #R90set
$80 set
Heavy Duty Dual Rings for our 102mm telescopes . Features a large
footprint. Has multiple 6mm holes on both sides spaced at 60mm and 1 1/2"
apart and one in center. Uses an oversized aluminum knob with rubber grip
making it easy to use under all conditions, with or without gloves. Works
with all our 4" telescopes. #R102set
$80 set
5" I.D. CNC aluminum mounting rings. Has five holes
top and bottom including a center hole, two holes 1.5" apart and two
holes 60mm apart. #R5 set
$175 Set
6" I.D. CNC aluminum mounting rings. Has five holes
top and bottom including a center hole, two holes 1.5" apart and two
holes 60mm apart. #R6 set
$185 Set
Plates and Dovetail Shoes
Short Vixen type dovetail plate for dual rings above
Mounts our rings to the M1 and M3
mounts, Vixen mounts, CG5,
EQ5, GP, LXD55 and similar clone mounts from China. Center 1/4-20 hole
attaches plate to a camera tripod. Has side slots for the safety screw
used on Vixen GP type mounts. 5.4" long. More Info
#TP5
$39
Long Vixen type dovetail plate for dual rings above
Mounts our rings to the M1 and M3
mounts, Vixen mounts, CG5,
EQ5, GP, LXD55 and similar clone mounts from China. Center 1/4-20 hole
attaches plate to a camera tripod. Has side slots for the safety screw
used on Vixen GP type mounts. 7 7/8"" long. #TP10
$39
TD2 Spring Loaded Dovetail Base
Same dovetail show used on the M1 and M3
mounts. Attaches with two
1/4-20 cap head screws that are 1.5" apart. Holds the TP5 plate and the
standard Vixen style GP/CG5/EQ5 dovetails. Also has a center 1/4-20 hole
for mounting on a standard camera tripod. # TD2
$69
Losmandy sized Dovetail Base and Accessories
Attaches to either arm of the M7
for use with our TP-6 dovetail rail below. Also holds the standard
Losmandy and Mountain Instruments plates such as the DUP and DUPS plates. Available
in August
#TD7
$99
TP-6 3" Standard Dovetail Plate
Wide dovetail plate mounts directly to
either arm of the M6 mount. You can mount any Stellarvue ring system to
the plate for direct attachment. This plate also works with the 3"
Dovetail Base sold directly above for quick attachment and removal of the
telescope. Made for the Stellarvue, Losmandy and Mountain Instrument
Mounts. This plate is highly recommended for all our telescopes,
especially for those 115mm and larger. Mount rings with a center hole for
variable spacing up to 6" apart. Use a dual screw attachment (1.5"
apart) 5" spacing which is the same as the Losmandy DUPS plate.
#TP-6
$65
TP-19 3" Superplate
A 19" dovetail plate
designed for the Stellarvue 160, 165, and 190 telescopes. 3" Wide dovetail
fits the TD3 dovetail base above as well as Losmandy and Mountain
Instruments mounts. Mount rings with a center hole for variable
spacing up to 16" apart. Use a dual screw attachment (1.5" apart) for
either 5" or 16" spacing. #TP19
$99
Plates for M4 Mounts
M4 Adapter Plate for
Clamshells
With this plate Stellarvue and Televue
clamshell rings
can be mounted to the M4 mount. #TP4.
$24
M4 Adapter Plate
with 2" Dovetail for Stellarvue's new cnc clamshells
With this plate, the new Stellarvue cnc
clamshells (R90C and R102C)
can be mounted to the M4 mount. The plate includes the TD2 dovetail #TP2.
$79
