banneradapters
 
Buy Item Description Price
2" Camera Adapter
This is the standard camera adapter. It Inserts in 2" focuser for wide angle, prime focus photography.  Works with your camera. You will need to purchase a T adapter and T ring from your camera store that fits your camera. We do not carry camera rings. #CA3. 

$39
2" Camera Adapter
Unit has a T2 thread which is similar to the one above  but this one places the camera closer to the objective. Use this if you need more inward focuser travel. 40mm thread. You will need to purchase a T adapter and T ring from your camera store that fits your camera. We do not carry camera rings. #CA3-T2. 

$39
Webcam Camera Adapter
Works with most webcams. Screw it into your webcam and insert the other end into your 1.25" focuser adapter. #CA3-WEBCAM. 

$24
Camera Mounting Plate 
Mount your camera to the top of one of your rings. For the R80 or R4 hinged rings only. This is not designed for clamshell rings. Holds any camera. Take piggyback photographs with your camera, guiding through the main scope. Attaches to rings using a 6mm threaded center hole.  #CA4M		 $39
Camera Mounting Plate 
Mount your camera to the top of one of your rings. Take piggyback photographs with your camera, guiding through the main scope. This is not designed for clamshell rings. It is designed to work with our SV115 and larger mounting rings and other telescopes using a 1" wide ring and a 1/4-20 center hole.   #CA4A		 $39
Camera Mounting Plate for SV cnc clamshell
Mount your camera to the top of the new Stellarvue cnc clamshell (not the former Nighthawk clamshell). Take piggyback photographs with your camera, guiding through the main scope. The base mounts to the two 10-32 holes on top of the clamshell and the mounting plate attaches to that. Your camera attaches to the mounting plate.  #CA4C		 $39
Micro-metric Digital Camera Mount. Made to work with 1.25" eyepieces. Now it is easy to take pics of the moon and down the street through your telescope.

1. Mount your small digital camera to this mount

2. Attach the mount to your eyepiece

3. Use the two micro-metric adjustment knobs to easily center the camera to the eyepiece. Different eyepieces provide different magnification powers. Available in May.  #CA6

 $79

$49
Micro-metric Digital Camera Mount. Made to work with 2" eyepieces up to 2.55" in diameter. Now it is easy to take pics of the moon and down the street through your telescope.

1. Mount your small digital camera to this mount

2. Attach the mount to your eyepiece

3. Use the two micro-metric adjustment knobs to easily center the camera to the eyepiece. Different eyepieces provide different magnification powers. Now available. #CA5

$79

$49
1.25" Eyepiece Adapter

A squared 1.25" eyepiece adapter that fits 2" focusers. Provides additional focus distance from primary when using 1 1/4" diagonals and eyepieces needing to focus further out. Also has camera t-thread for attaching cameras to the telescope.  Single set screw. #FA

 $12
Deluxe 1.25" Eyepiece Adapter

A 1.25" adapter for 2" diagonals. Uses a compression ring to safely hold eyepieces and has the insert safety groove on the outside. Knurled top and threaded for filters. If using this adapter, a 1.25" diagonal and our Crayfod focuser, some 1.25" eyepieces may not come to focus. In this case, use the FA above. #FA2

 $29
Short 2" Extension Tube

Provides 1 3/8" of additional focus travel to the rear. Uses compression ring. #ET1

$24
Deluxe 2" Extension Tube

Provides an additional 2 3/8" of back focus. All aluminum anodized parts with rubber grip, brass compression ring, filter thread on insert tube and beveled insert which improves the snugness of the fit as the lock screw is tightened. Works well with our FA2 1 1/4" adapter.  #ET3

$49
Long 2" Extension Tube

Same as ET3 above but provides a full 4.75" of extension. For use only with our binoviewing telescopes in place of a threaded extension for more convenience.

We recommend this unit be used with the Feather Touch focuser as it has a greater lifting capacity that standard Crayford focusers. 

#ET475

$49

View Your Shopping Cart

 

All specifications and prices are subject to change without  notice. We often modify designs to improve them. All copy and photographs copyright 2008 and may not be used without permission.

Stellarvue trademarks and service marks, and logos and product and service names are trademarks of Stellarvue (the "Stellarvue Marks"). Without Stellarvue's prior permission, these marks may not be displayed or used in any manner. Some products are patent pending. Stellarvue will take necessary action against any dealer in the USA carrying imitations of our proprietary products. Dealers are warned to check with us first before purchasing similar products as they may be illicit copies of products we specifically designed. Such products may only be sold by authorized Stellarvue dealers. We encourage all dealers interested in carrying our specific products to become a Stellarvue dealer. Contact vic@stellarvue.com or call (530) 823-7796 for more information.